Before we jump into the interactive part below, let's have a refreshment
on the Flight Parametres for Thermal Inspections:
🚨Solar Inspection PRO - What was the GSD again?
🚨Solar Inspection Essential - What was the side overlap?
Before you take off, please use this cheat sheet as a reminder on what are the main criteria for High-Quality Data.
🚨CHECK LIST - Think Quality 👉🏻 Read Twice Fly Once!
🚨Dos & Don’ts
🚨 ALWAYS PARALLEL TO THE PANELS
🚨 PHOTO CHECKER - tool that might save you from coming back to the site! "Quality is not an act it is a habit"
🚨 Axis Trackers
We prefer that the panels are fixed horizontally if this is not possible the angle of the trackers should not exceed 50° from horizontal.
Avoid flying early in the morning/late in the afternoon when the sun is in the lowest position in order to minimise the inter-row glare
💡Dual Axis Trackers
If the dual axis tracker is higher than <5 m - please follow the rooftop guidelines and increase the altitude if needed to make sure every tracker is entirely visible on the visual and thermal photos.
